Wallbox POLICHARGER NW-SC3F Three-phase 22kW

The entire range of NW Policharger allows for an easy and quick installation, adapting to any location.

The Policharger NW SC3F Wallbox charger is three-phase with a maximum charging power of 22 kW. It has a type 2 socket and is compatible with all electric and hybrid vehicles.

It offers multiple options such as integrating protections inside, protection against DC leaks, solar surplus utilization, locking key, auxiliary Schuko base, etc.

Options such as overvoltage protection, locking key, solar production control... must be added to the purchase so that everything comes integrated from the factory in the POLICHARGER NW-SC3F Three-phase 22kW.

Accessories to customize Policharger Wallboxes can be added to the order and come pre-installed from the factory.

• Surge and type A differential Revalco (Three-phase) ADD ACCESSORY.
• Self-rearming surge and type A differential Revalco (Three-phase) ADD ACCESSORY.
• Activation / locking key for the Wallbox ADD ACCESSORY.
• Photovoltaic solar production control option ADD ACCESSORY.
• Special connector with charging port opening button for Tesla ADD ACCESSORY.
• Metal post for NW Wallbox ADD ACCESSORY.
• Charging hose hanger ADD ACCESSORY.
• Type 2 connector holder ADD ACCESSORY.

All equipment features dynamic load regulation and communication between devices for intelligent energy distribution as standard.

• Maximum utilization of selected power
• Possibility of controlling solar surplus
• Automatic regulation without exceeding contracted power
• Possibility of integrated protections
• Extremely versatile and configurable
• Integration into home automation systems

With Wallbox, we refer to the physical charging point. At El Almacén Fotovoltaico, we offer different models from various manufacturers. It is usually installed on the wall, but can also be on metal posts or even on the ceiling.

The Wallbox provides power to the electric vehicle to allow for its charging. Inside the Wallbox, there are different electronic and protective elements, communicating with the electric vehicle to recharge its batteries. This two-way communication transmits the charging data from the vehicle to the Wallbox, depending on the model, it will display information on its own LED screen or on the APP. The Wallbox's electronic system will adjust to the power needed by the electric car safely. Depending on the Wallbox model to be installed, it can work in both single-phase and three-phase electrical installations.

If the installation is in a shared garage, it is necessary to communicate the intention to place the charging point through a Wallbox to the president or administrator of the community.

Specifications

• Model: Policharger NW SC3F
• Outer dimensions: 253.62 x 435.62 x 150 mm (without cable)
• Power supply: Three-phase 400V AC 3P+N+PE
• Maximum Power: 22 kW
• Material type: High-strength ABS plastic
• Protection: IP65 / IK10
• Cable length: -
• Total weight: 4.5 Kg

At El Almacén fotovoltaico you can buy the inverter separately, or purchase a kit for your self-consumption installation along with panels, structure, panels, wiring and other accessories. You can also hire Enneo engineering services for legalization, certificates, and subsidy processing.

Visit our BLOG.

Downloads

Technical Data Sheet

Manual

Manual with photovoltaic management