Wallbox POLICHARGER NW-DBLSC3F Three-phase 22kW

The entire NW range of Policharger allows for easy and quick installation, adapting to any location.

The Policharger NW DBLSC3F Wallbox charger is a three-phase charger with a maximum charging power of 22 kW. It features Type 2 connectors (IEC 62196) and is suitable for electric and hybrid vehicles.

Options such as overvoltage protection, locking key, solar production control... must be added to the purchase so that everything comes integrated from the factory in the POLICHARGER NW-DBLSC3F Three-Phase 22kW.

Accessories to customize Policharger Wallboxes can be added to the order and come factory-installed.

• Overvoltage and Type A differential protection Revalco (Three-Phase) ADD ACCESSORY.
• Self-rearming overvoltage and Type A differential protection Revalco (Three-Phase) ADD ACCESSORY.
• Activation / locking key for the Wallbox ADD ACCESSORY.
• Option for solar photovoltaic production control ADD ACCESSORY.
• Special connector with charging port opening button for Tesla ADD ACCESSORY.
• Metal pole for NW Wallbox ADD ACCESSORY.
• Individual protection extension for each outlet (Three-Phase) ADD ACCESSORY.
• Charging hose hanger ADD ACCESSORY.
• Type 2 connector holderADD ACCESSORY.

All devices feature dynamic load regulation and communication between devices for intelligent energy distribution as standard. Double devices modulate the load up to 32A for a vehicle or up to 16A per outlet when charging 2 vehicles simultaneously.

They support multiple options such as integrating protections inside, protection against DC leaks, utilization of solar surplus, locking key, auxiliary schuko base, etc.

All devices feature dynamic load regulation and communication between devices for intelligent energy distribution as standard.

• Maximum use of the selected power
• Possibility of controlling excess solar power
• Automatic regulation, without exceeding the contracted power
• Possibility of integrated protections
• Extremely versatile and configurable
• Integration in home automation systems

With Wallbox we refer to the physical charging point, at El Almacén Fotovoltaico we offer different models from different manufacturers. It is generally installed on a wall, but can also be installed on metal posts or even on the ceiling.

The Wallbox provides power to the electric vehicle to allow it to charge. Inside the Wallbox there are different electronic and protective elements, communicating with the electric vehicle to recharge its batteries. This two-way communication transmits the vehicle's charging data to the Wallbox, and depending on the model, it will display information on the LED screen or in an app. The Wallbox's electronic system will adjust to the power needed by the electric car safely. Depending on the Wallbox model to be installed, it can work in both single-phase and three-phase electrical installations.

If the installation is in a shared garage, it is necessary to communicate the intention of placing the charging point through a Wallbox to the president or administrator of the community.

Specifications

• Model: Policharger NW DBLSC3F
• Outer dimensions: 253.62 x 435.62 x 150 mm (without cable)
• Power supply: Three-phase 400V AC 3P+N+PE
• Maximum power: 22 kW
• Material type: High-strength ABS plastic
• Protection: IP65 / IK10
• Cable length: -
• Total weight: 5 Kg

At El Almacén Fotovoltaico you can buy the inverter separately or buy a kit for your solar self-consumption installation along with solar panels, structure, panels, wiring, and other accessories. You can also hire the services of Enneo engineering for legalization, certificates, and subsidy processing.

Visit our BLOG.

Downloads

Technical Sheet

Manual

Manual with photovoltaic management