HorarioH: 08:30-14:00 / 16:00-18:30
Victron MultiPlus-II 48/5000 48v 70-50
The MultiPlus-II is an inverter/charger capable of operating with grid electricity or in standalone mode. It combines the functions of the Multiplus and the Multigrid all in one unit.
It can be combined with grid-tied photovoltaic inverters (self-consumption) or solar MPPT charge controllers.
By adding this inverter/charger to a self-consumption photovoltaic installation, we can store excess solar energy in batteries to then use that stored energy when needed to power loads.
Works as a UPS in case of a power outage with a transfer time of less than 20 milliseconds.
IF YOU WOULD LIKE A DIFFERENT QUANTITY, PLEASE CONTACT OUR SALES DEPARTMENT AT COMERCIAL@ELALMACENFOTOVOLTAICO.COM
€1,579.90
€1,017.90 Save €562.00
Tax included
Applications:
The MultiPlus-II is designed for self-consumption or off-grid installations where it is necessary to have more connectivity with other devices, such as Smart regulators or lithium batteries.
By adding this inverter/charger to a self-consumption photovoltaic installation, we can store the surplus energy in batteries to later use that accumulated energy when needed.
Paralleling:
Practically unlimited power thanks to parallel and three-phase operation.
Up to 6 Multiplus units can operate in parallel to achieve higher output power.
In addition to parallel connection, three units of the same model can be configured for three-phase output.
ESS: Energy Storage System:
There are different possible system configurations, more detailed information can be found in the ESS Design and Configuration Manual.
Grid parallel topology with FV inverter
The PV energy is converted directly to AC. The MultiPlus-II will use the excess photovoltaic energy to charge the batteries or return energy to the grid, and will discharge the battery or use grid energy to complement the lack of photovoltaic energy. In case of a power outage, the MultiPlus-II will disconnect from the grid and continue powering the loads.
Grid parallel topology with MPPT solar charge controller
The MultiPlus-II will use data from the external AC current sensor (which must be ordered separately) or the energy meter to optimize self-consumption and, if necessary, avoid returning excess solar energy to the grid. In case of a power outage, the MultiPlus-II will continue powering critical loads.
Standard mobile application or disconnected from the electrical grid with external current sensor
Maximum current sensor range: 50A and 100A resp.
Marine, mobile or standard off-grid application
Loads that should be turned off when the AC input power is not available can be connected to a second output (not shown in the image). The PowerControl and PowerAssist functions will consider these loads to limit the AC input current to a safe value when there is AC current.
VRM Portal
Includes free remote monitoring and tracking web, can display all system data in a comprehensive graphic format. System settings can be modified remotely through the portal. Email alerts can be received.
Downloads:
AF-VICTRON-MultiPlus-II-48/5000/70-50
No customer reviews for the moment.