Structures Union Kit S15
€14.50
Sunfer S15 solar panel structure connection kit allows to connect the G1 profiles of kits so that the panels are continuous. It consists of...
HorarioH: 08:30-14:00 / 16:00-18:30
Kit 3 Inclined support at 30º or 15º for Sunfer 11H3 metal roof cover.
The Sunfer 11H3 closed inclined support structure kit for three solar panels, on a sheet metal roof or flat surface substructure, with the possibility of a 15º or 30º inclination.
The panels should be placed horizontally for 72-cell modules with maximum dimensions of 2279 x 1150mm, and a profile width between 30 and 45mm.
The structures included in the kit come preassembled. It is not necessary to disassemble any element of the existing roof structure, making installation easier.
The kit allows for expansion as needed. Self-tapping screws for fastening are included in the kit, and the use of a sealing washer is recommended.
€266.90
€264.60 Save €2.30
Tax included
The Sunfer 11H3 closed inclined support structure for three solar panels, on a sheet metal roof or flat surface substructure, with the possibility of an inclination of 15º or 30º.
Keep in mind that for other roofs, at The Solar Warehouse, we have other specific Sunfer kits, such as for tiles, sheet metal roofs, or ground mounting.
The panels will be placed horizontally for 72-cell modules with maximum dimensions of 2279 x 1150mm, as well as a profile width between 30 and 45mm.
The structures included in the kit come pre-assembled. It is not necessary to disassemble any element of the existing roof structure, making installation easier.
All products are delivered with detailed assembly manuals and technical data sheets for all products.
In the downloads section, there is a specific datasheet from the manufacturer for proper installation.
This structure withstands winds of up to 150 km/h. The technical data sheet includes a section on wind loads.
Certificate
Sunfer has ISO:9001 certification for the design, manufacture, sale, and installation of solar energy structures, as well as CE marking. The specific certificate for this kit can be downloaded from the following link:
Here is the catalog of Sunfer structures and accessories.
If you find any item that is not available from TheSolarWarehouse.com, please contact us so we can assist you.
Before installation, it must be verified that the roof structure is sufficiently rigid to support the photovoltaic solar panels.
The structure materials are made entirely of high-quality aluminum, while the screws and accessories are made of stainless steel.
The alloy of the profiles is EN AW 6005A T6, which is a high-strength aluminum alloy.
It offers up to 15 years of warranty on its raw material and up to 25 years on anodized material.
Depending on availability, shipping will be done in different packaging.
Warranty
Elements
- 4 Units Open Horizontal Inclined Triangle
- 12 Units Side Press Kit
- 4 Kit module guide profile union
- 4 Units Module guide profile
- 2 Units Module guide profile
- 2 Units Bracing
- 4 Self-tapping Screws
Downloads
AF-SUNFER-11H3-30
Data sheet
- Panel type
- 72 and 60 cells
- Panel position
- Horizontal
- Attachment
- Concrete tile/board
Metal strap - Inclination
- Tilted 15º-30º
No customer reviews for the moment.
You might also like
- On sale!
- On sale!
- -€2.00
- On sale!