The new APsystems QS1 inverter with boosted 1400w output in a single-phase high-efficiency grid-connected microinverter 96.5%. These inverters, which are grid-connected, convert the power generated by the photovoltaic chains from DC to AC power and feed it into the electrical grid.
It has an IP67 protection rating for installation under the panels on the roof. Its construction is made of aluminum for passive cooling through an aluminum radiator. It does not include fans, and its noise level is extremely low.
It has 4 MPPT and the power of the photovoltaic array is oversized by 25%.
It comes with a 10-year standard warranty for maximum profitability.
The new QS1 inverter from APsystems boosted with an output of 1400W ensures high efficiency and maximum reliability thanks to its 4 independent MPPT inputs and a maximum continuous output power of up to 1,400 watts, an improvement over the previous model which was 1200W. It supports solar panels from 250W to 460W, with a maximum input voltage of 60V. In any case, 460W panels can be installed without any problem, with the only caveat that production may be slightly reduced depending on the orientation, tilt, and time of year. Please contact us for advice. An informative file on oversizing is attached.
Along with the microinverter, the Y3AC cable must be purchased for connection. Any manipulation of the cable and connector that comes with the microinverter may void the warranty.
This product is designed for installers, and the original packaging is for four microinverters, so in the case of ordering a smaller quantity, the packaging will be OEM.
It is a high-quality product with compact dimensions of 281x231x41 mm.
Microinverters offer great versatility, as they have independent MPPT for maximum performance from the panels at all times. The maximum inverter current is 12A, and the voltage range is from 16V to 55V.
It allows for combining QS1 and YC600 in the same system, making it possible to expand the installation at any time, as long as the 20A limit on the AC bus is not exceeded.
.jpg)
Accessories
Monitoring
The QS1 inverter has wireless connectivity, communicates via the Zigbee protocol, and connects to the Ecu-C and Ecu-R monitoring systems. These systems communicate wirelessly with our mobile device for setup and detailed monitoring.
Configuration and monitoring are done through the EMA mobile app, available for both IOS and Android.
Warranty
The inverter comes with a 10-year warranty. The warranty will be applicable as long as the device has been used following recommendations and respecting compatibility between parts. The warranty can be extended to 20 years for a small fee by purchasing it on our website.
At El Almacén fotovoltaico you can buy the inverter separately or purchase a kit for your self-consumption installation along with panels, structure, panels, structure, switchboards, cabling, and other accessories. This inverter offers one of the best quality-price ratios in the catalog.
Data sheet
No customer reviews for the moment.
You might also like
