Solis 8kW S6-EH3P8K-H-EU

The S6 series from Solis is designed for residential hybrid systems.

They can operate with batteries to optimize self-consumption. It can work both connected to the grid and disconnected from it.

With the solar inverterThree-phase hybrid inverter Solis S6, Yes, you can connect solar panels and a battery.high voltage.

This inverter will harness solar energy during the day to supply power to household appliances and charge the battery.

At night, you will use the battery of...high voltageTo meet the energy needs of your home. This will prevent you from using energy from the grid.

• Compatible with peak saving mode.
• 3 or 4 integrated MPPT for various orientations of the array.
• Compatible with various brands and models of lithium batteries.
• Maximum loading/unloading capacity of 50 A/10 kW, industry-leading.
• Pre-wired battery cabling, meter, and CAN bus to reduce installation time.
• It supports unbalanced loads and half-wave loads in both the grid port and the backup port.
• Increased battery protection and operational functions to extend the battery life.

Technical characteristics

• Recommended maximum input power:12.8 kW

• Maximum input voltage:1000 V

• Nominal voltage:600 V

• Starting voltage:160 V

• MPPT voltage range:200-850 V

• Maximum input current:16 A / 16 A/ 16 years old

• Short-circuit maximum current:24 A / 24 A  = 24 divided by A  = 24 divided by A

• MPPT number:4

• Maximum number of input strings:4

• Battery Type:Lithium wool

• Battery voltage range:120-600 V

• Maximum loading / unloading power:8 kW

• Maximum charge/discharge current:50 A (could be interpreted as 50 to A)

• Communication:CAN/RS485

• Rated output power:8 kW

• Maximum output power:8.8 kVA

• Nominal voltage of the grid:3/N/PE, 380 V / 400 V This text is describing an electrical system with three-phase connections (3) and a neutral conductor (N), with a voltage range of 380 volts to 400 volts.

• Nominal frequency of the grid:50 Hz / 60 Hz

• Rated output current from the network:12.2 A / 11.5 A

• Maximum output current:13.4 A / 12.7 A

• THDi stands for Total Harmonic Distortion current (THDi).

Protection

• Anti-islanding detection:Yes
• Output overcurrent protection:Yes
• Short circuit protection:Yes
• Integrated AFCI (Arc Fault Detection) Protection:Yes (Activation required)
• Integrated DC switch:Yes
• Reverse polarity DC protection:Yes
• Photovoltaic overvoltage protection:Yes
• Battery reverse protection:Yes

Features

• Dimensions (length*height*width):600 x 500 x 230 mm
• Weight:32.6 kg
• Topology:Without transformer
• Own consumption (night):
• Operating temperature range:-25 ~ +60°C
• Protection level:IP66 stands for "Ingress Protection 66". It is a standard that indicates the level of protection provided by an enclosure against solid particles (such as dust) and liquids (such as water). An IP66 rating means that the enclosure is completely dust-tight and protected against powerful jets of water.
• Cooling:Natural convection
• Maximum operating altitude:4000 m
• Security standard / EMC:IEC/EN 62109-1/-2, IEC/EN 61000-6-1/-3
• Network connection standard:G98 or G99, VDE-AR-N 4105 / VDE V 0124, EN 50549-1, VDE 0126 / UTE C 15/VFR:2019, RD 1699/RD 244 / UNE 206006 / UNE 206007-1, CEI 0-21, C10/11, NRS 097-2-1, TOR, EIFS 2018.2, IEC 62116, IEC 61727, IEC 60068, IEC 61683, EN 50530, MEA, PEA
• Screen:LED + Bluetooth + APP
• Communication:CAN, RS485, Ethernet, Optional: Wi-Fi, Cellular, LAN

Operating mode

• Network connectionThis inverter operates when connected to the grid, synchronizing with it. In the event of a power outage, the equipment will disconnect.

• Isolated: This inverter works in off-grid mode.

Batteries

• Pylontech H48074

• Pylontech H48050

• Soluna 10kW

• Dyness PowerRack HV1

• Dyness PowerRack HV2

• Dyness PowerRack HV3

• ... consult the manufacturer's listing.

COMPATIBLE BATTERIES

• Maximum efficiency: 98.0%
• Efficiency EU: 97.5%
• Battery charging through maximum PV efficiency: 98.3%
• Battery charge/discharge at maximum AC efficiency: 97.5%

Accessories

3S-WiFi-ST Adapter(Monitoring)

With this device, you will be able to remotely monitor your installation to obtain data analysis and failure alarms at any time and place. It also allows you to manage and perform maintenance operations on the installation remotely.

The device can be installed in seconds and connects to the internet via Wifi.

• Plug and play installation, quick and simple.

• Access both through a web browser and through a free application for Android and iOS.

• Local and remote monitoring.

• WiFi communication (even for outdoor use).

AdapterDLS-W/DLS-G/DLS-L

The Solis monitoring system monitors the generation of the photovoltaic installation. The system can be remotely monitored via WIFI and GPRS to provide users with data analysis and alarms at any time and place. Solis provides the data to make the product's operation more stable, reliable, and intelligent.

• Data logWIFI.

• ConnectionFlexible Wi-FiOutdoors.

• Installation of mobile applications forAndroid and iOS.

• Quick installation and easy operation that allowslocal and remote monitoring.

• LAN data log.

• Functionality"Plug and play".

• ConnectionLAN stands for Local Area Network.stable and reliable.

• Data logGPRS stands for General Packet Radio Service..

• Easy visualizationData and other information through the mobile device.

• GPRS communicationThat allows mobile monitoring inany time and place.

Data record S2-WL-ST

TheNew generationSolis communication monitoring modules adopt a port.RS485 is a standard for serial communication that specifies the electrical characteristics of drivers and receivers, as well as the data format and transmission speeds. It is commonly used for industrial applications and allows for communication over long distances with multiple devices connected on the same network.4-pin connector and a USB port, with plug-and-play connection method. Applicable to areas covered by signals.WifiAndLocal Area Network.

With this accessory you cancommunicateUntil10 investorsFor its joint monitoring.

Export Power Manager EPM1/EPM3/EPM3-PLUS

Solis Export Power Manager is the ideal solution for intelligent energy management for both residential and commercial systems. The unit allows you to adjust export values to meet local grid regulatory requirements. It is designed for high-power equipment.

Monitoring

Energy management with the Solis export energy manager allows for increased self-consumption and efficient use of locally generated photovoltaic energy.

SolisCloud

For simple operations and maintenance, the new platform features a full-size screen displaying all your facilities with real-time data. It will have a smart alarm system that provides recommendations to quickly repair any field failures. The in-depth analysis tools allow you to understand the overall status of your system.The scanning of the IV curveYou can easily and quickly perform on your entire system. A live energy flow screen provides visibility of both standard solar systems and backup systems. Most importantly, you will have afull controlFrom their systems and will be able to monitor and adapt anything whenever and however they want.

The app is installable for bothAndroid"how about"IOS.

• Automatic switchover of UPS

• Sector-leading maximum load/unload capacity of 50 A/10 kW

• Compatible with peak saving mode

• Battery wiring, meter, and pre-fabricated CAN wiring to reduce installation time.

• It admits unbalanced and half-wave loads in both the mains and backup ports.

• Compatible with various brands and models of lithium batteries

• Increased battery protection and operational functions to extend the battery life.

Warranty

The investor has access to a5-year warranty.The warranty will be applicable as long as the device has been used following the recommendations and respecting the compatibility between the parts.

WARRANTY

Certificates

CERTIFICATES

EU CERTIFICATES

I'm sorry, but it seems like your message got cut off. Can you please provide more context or complete the sentence so I can help you with the translation?The Photovoltaic WarehouseYou can buy the inverter separately or buy aI'm sorry, but "kit" is the same in both Spanish and English. It can refer to a set of items or tools packaged together for a specific purpose.For your self-consumption installation along withpanels, structure, paintings, wiringAnd other accessories. You can also hire theEnneo Engineering servicesTo thelegalization, certificates andgrant processing.

Downloads

TECHNICAL SPECIFICATIONS

MANUAL