Wood or concrete fastening with chemical anchor SUNFER ENERGY - 1

Wood or concrete fixation with chemical anchor

Wood fixing screw, or concrete with chemical anchor, Sunfer S01 allows fixing G1 profiles. To wood using a wood screw or to concrete or walls using a chemical anchor and a sieve with a diameter of 14-16 mm.

It consists of a stainless steel screw with a metric of 10 mm and a length of 200 mm, a rubber gasket, a nut, nut, and lock nut. It includes the hammer head screw. It does not include the chemical anchor or the sieve .

€4.90

Tax included

Double threaded screw with sealing washer, made of stainless steel (A2-70).

Part of the kit for coplanar support Sunfer 01V designed for securing a photovoltaic solar panel on any type of inclined roof, with anchoring to concrete and/or wood.

For other types of roofs, at El Almacén Fotovoltaico, we have specific Sunfer kits available, such as for sandwich panels, sheet metal roofs, or ground installations.

We recommend anchoring it on the ridge of the tile to avoid any type of leakage.

Depending on the system on which the tile roof is mounted, whether it's wood or concrete, at El Almacén Fotovoltaico, we advise you to prepare the kit installation differently.

For a roof on a concrete layer, we recommend using mesh or basket, and chemical anchor (not included).

For installing the kit on wooden beams, we recommend pre-drilling the beam without hammer action, with a diameter smaller than the included screw. This will make the assembly easier for you.

The Sunfer sealing joints are made of EPDM.

This structure is designed for tile roofs. It can withstand winds of up to 150 km/h. The technical data sheet includes a section on wind loads.

Certificate

Sunfer has the ISO:9001 certificate for the design, manufacture, sale, and installation of solar energy structures, as well as the CE marking. You can download the specific certificate for this kit at the following link:

CERTIFICATE