Structure kit for photovoltaic solar panel. Coplanar Sunfer 01V3 continuous screw support for sloped roof with anchorage to concrete and/or wood. It has a capacity of three panels of 60 or 72 cells arranged vertically.
Maximum size of the panel 2279 x 1150 mm and width of 30 to 45 mm.
The kit is easy to install, without the need to remove the tile and allows for expansion according to needs.
The structure kit for coplanar support Sunfer 01V03 is designed for fixing 3 photovoltaic solar panels on any type of sloping roof, with anchoring to concrete and/or wood.
We remind you that for other roofs, at El Almacén Fotovoltaico, we have other specific Sunfer kits, such as for sandwich panels, sheet metal roofs, or ground installations.
The panels are to be installed vertically and can accommodate panels with 60 and 72 cells and with maximum dimensions of 2279 x 1150 mm, as well as a width between 30 and 45 mm.
The system is screwed to concrete/wood using a double-threaded screw with a sealing washer, made of stainless steel (A2-70).
We recommend anchoring it on the ridge of the tile roof to avoid any type of leakage.
Depending on the system on which the tile roof is mounted, whether it is wood or concrete, at El Almacén Fotovoltaico, we advise you to prepare the kit installation differently. While for roofs on a concrete layer, we recommend using mesh or basket, and chemical anchor. In the case of installing the kit on wooden beams, we recommend pre-drilling the wooden beam without a hammer drill, with a diameter smaller than the included screw. All to facilitate assembly.
The Sunfer sealing joints are made of EPDM.
This structure is designed for tile roofs. It withstands winds of up to 150 km/h. The technical data sheet includes a section on wind loads.
Sunfer is ISO:9001 certified for the design, manufacture, sale, and installation of solar energy structures, as well as having CE marking. The specific certificate for this kit can be downloaded from the following link:
Here you have the catalog of Sunfer structures and accessories.
If you find any item unavailable on ElAlmacenFotovoltaico.com, please contact us so we can assist you.
Before installation, it must be ensured that the roof structure is sufficiently rigid to support the photovoltaic solar panels.
The structure materials are entirely made of high-quality aluminum, while the screws and accessories are made of stainless steel.
The alloy of the profiles is EN AW 6005A T6, a high-strength aluminum alloy.
It offers up to 15 years of warranty on its original material, and up to 25 years on anodizing.
Depending on availability, the shipment will be in different packaging.
Elements
Data sheet
No customer reviews for the moment.
You might also like
