Structures Union Kit S15
€14.50
Sunfer S15 solar panel structure connection kit allows to connect the G1 profiles of kits so that the panels are continuous. It consists of...
HorarioH: 08:30-14:00 / 16:00-18:30
Kit 5 Coplanar bolted support for Sunfer 01V5 tile roof
Structure kit for photovoltaic solar panel. Coplanar support Sunfer 01V5 continuously screwed for sloped roof with anchoring to concrete and/or wood. It has the capacity for five panels of 60 or 72 cells arranged vertically.
Maximum size of the panel 2279 x 1150 mm and width of 30 to 45 mm.
The kit is easy to install, without the need to remove the tile, and allows for expansion according to needs.
€190.75
€153.48 Save €37.27
Tax included
The structure kit for coplanar support Sunfer 01V04 is designed for fixing photovoltaic solar panels on any type of sloped roof, with anchoring to concrete and/or wood.
Remember that for other types of roofs, at El Almacén Fotovoltaico, we have other specific Sunfer kits, such as for sandwich panel, sheet metal roofs, or ground installations.
The panels are installed vertically and support panels with 60 and 72 cells and with maximum dimensions of 2279 x 1150 mm, and a width between 30 and 45 mm.
The system is screwed to concrete/wood using a double-threaded screw with sealing washer, made of stainless steel (A2-70).
We recommend anchoring it on the ridge of the tile to prevent any leaks.
Depending on the system on which the tile roof is mounted, whether it is wood or concrete, at El Almacén Fotovoltaico, we advise you to prepare the kit installation differently. For roofs with a concrete layer, we recommend using a mesh or basket, and chemical anchor. In the case of installing the kit on wooden beams, we recommend pre-drilling the wood beam without percussion, with a diameter smaller than the included screw. All this to facilitate assembly for you.
The Sunfer sealing joints are made of EPDM.
This structure is designed for tile roofs. It withstands winds of up to 150 km/h. The technical data sheet includes a section on wind loads.
Certificate
Sunfer has the ISO:9001 certification for the design, manufacturing, sale, and installation of solar energy structures, as well as CE marking. You can download the specific certificate for this kit at the following link:
Here you have the catalog of Sunfer structures and accessories.
If you find any item that is not available on ElAlmacenFotovoltaico.com, please contact us so we can assist you.
Before installation, ensure that the roof structure is rigid enough to support the photovoltaic solar panels.
The structure materials are entirely made of high-quality aluminum, while the screws and accessories are made of stainless steel.
The alloy of the profiles is EN AW 6005A T6, a high-strength aluminum alloy.
It offers up to 15 years of warranty on its original material, and up to 25 years on the anodized finish.
Depending on availability, shipping will be done in different packaging.
Warranty
Elements
- Consult the Installation Manual.
Downloads
AF-SUNFER-01V05
Data sheet
- Panel type
- 72 and 60 cells
- Panel position
- Vertical
- Attachment
- Concrete tile/board
- Inclination
- Coplanar means that all the points or lines lie in the same plane.
No customer reviews for the moment.
You might also like
- On sale!
- On sale!
- On sale!