Kit 1 Coplanar bolted support for Sunfer 01H1 tile roof.

Structure Kit for a photovoltaic solar panel. Co-planar support Sunfer 01H1 with continuous screw for inclined roof with anchoring to concrete and/or wood. It has capacity for a 60 or 72-cell panel arranged horizontally.

Maximum size of the panel 2279 x 1150 mm and width of 30 to 45 mm.

The kit is easy to install, without the need to remove the tile, and allows for expansion based on needs.

€58.90
Tax included
Fuera de stock

Paypal

The structure kit for coplanar support Sunfer 01H01 is designed for fixing a photovoltaic solar panel on any type of inclined roof, with anchoring to concrete and/or wood. Horizontally.

We remind you that for other types of roofs, at The Photovoltaic Warehouse, we have other specific Sunfer kits, such as for sandwich panels, metal roofs, or ground installations.

The panel installation will be vertical and supports panels with 60 and 72 cells and with maximum dimensions of 2279 x 1150 mm, as well as a width between 30 and 45 mm.

The system is screwed to concrete/wood using a double-threaded screw with sealing washer, made of stainless steel (A2-70).

We recommend anchoring it on the ridge of the tile to avoid any type of leaks.

Depending on the system on which the tile roof is mounted, whether it is wood or concrete, at The Photovoltaic Warehouse, we advise you to prepare the kit installation differently. While for roofs on a concrete layer, we recommend using mesh or basket, and chemical anchor. In the case of installing the kit on wooden beams, we recommend pre-drilling the wood beam without percussion, with a diameter smaller than the included screw. All this to facilitate assembly.

The sealing joints of Sunfer are made of EPDM.

This Structure is designed for tile roofs. It withstands winds of up to 150 km/h. The technical data sheet includes a section on wind loads.

Certificate

Sunfer has the ISO:9001 certificate for the design, manufacture, sale, and installation of solar energy structures, as well as the CE marking. The specific certificate for this kit can be downloaded from the following link:

CERTIFICATE


Here you have the catalog of Sunfer structures and accessories.

SUNFER CATALOG/PRICES

If you find any item that is not available on The Photovoltaic Warehouse.com, please contact us to arrange it for you.

Before installation, you must ensure that the roof structure is rigid enough to support the photovoltaic solar panels.

The structure materials are made entirely of high-quality aluminum, while the screws and accessories are made of stainless steel.

The alloy of the profiles is EN AW 6005A T6, which is a high-strength aluminum alloy.

It offers up to 15 years of warranty on the raw material and up to 25 years on the anodized material.

Depending on availability, the shipment will be in different packaging.

Warranty

WARRANTY

Elements

  • Consult the Installation Manual.

Downloads

TECHNICAL SHEET

INSTALLATION MANUAL

TECHNICAL SHEET KIT

AF-SUNFER-01H01

Data sheet

Panel type
72 and 60 cells
Panel position
Horizontal
Attachment
Concrete tile/board
Inclination
Coplanar means that all the points or lines lie in the same plane.

Download

Product technical specifications

Technical specifications of Sunfer 01H structure

Download (1.21M)

No customer reviews for the moment.

You might also like

New Account Register

Si es usted instalador podrá acceder al portal B2B con descuentos exclusivos. Una vez registrado, tenemos que validad su cuenta. Es necesario nos envie el modelo 036 a webmaster@elalmacenfotovoltaico.com. Su Cuenta será activada en un plazo máximo de 48h
Already have an account?
Log in instead Or Reset password