Structures Union Kit S15
€14.50
Sunfer S15 solar panel structure connection kit allows to connect the G1 profiles of kits so that the panels are continuous. It consists of...
HorarioH: 08:30-14:00 / 16:00-18:30
Kit 2 Coplanar Screwed Support for Sunfer 01H2 Tile Roof Cover
Solar panel structure kit for coplanar support Sunfer 01H2 with continuous screwing for inclined roof with anchoring to concrete and/or wood. It has a capacity for 1 to 6 panels of 60 or 72 cells arranged horizontally.
The kit is easy to install, without the need to remove the tile, and allows for expansion based on needs.
€119.00
Tax included
The structure kit for coplanar support Sunfer 01H02 is designed for fixing two photovoltaic solar panels on any type of sloped roof, with anchoring to concrete and/or wood. In horizontal
We remind you that for other roofs, at The Photovoltaic Warehouse, we have other specific Sunfer kits, such as for sandwich panel, sheet metal roofs, or ground installations.
The panel placement will be vertical and supports panels with 60 and 72 cells and with maximum dimensions of 2279 x 1150 mm, as well as a width between 30 and 45 mm.
The system is screwed into concrete/wood through a double-threaded screw with sealing washer, made of stainless steel (A2-70).
We recommend anchoring it on the ridge of the tile roof to avoid any type of leaks.
Depending on the system on which the tile roof is installed, whether it is wood or concrete, The Photovoltaic Warehouse advises you to prepare the kit installation differently. While for the roof on a concrete layer, we recommend using mesh or basket, and chemical anchor. In the case of installing the kit on wooden beams, we recommend pre-drilling the wooden beam without percussion, with a diameter smaller than the included screw. All to facilitate assembly.
The Sunfer sealing joints are made of EPDM.
This structure is designed for tile roofs. It withstands winds of up to 150 km/h. In the technical data sheet, there is a section on wind loads.
Certificate
Sunfer has the ISO:9001 certificate for the design, manufacturing, sale, and installation of solar energy structures, as well as having CE marking. The specific certificate for this kit can be downloaded at the following link:
Here you have the catalog of Sunfer structures and accessories.
If you find any item that is not available from The Photovoltaic Warehouse, please contact us so we can arrange it for you.
Before installation, it should be checked that the roof structure is rigid enough to support the photovoltaic solar panels.
The structure materials are entirely made of high-quality aluminum, while the screws and accessories are made of stainless steel.
The alloy of the profiles is EN AW 6005A T6, which is a high-strength aluminum alloy.
It offers up to 15 years of warranty on its raw material and up to 25 years on anodizing.
Depending on availability, the shipment will be in different packaging.
Warranty
Elements
- Check the Installation Manual.
Downloads
AF-SUNFER-01H02
Data sheet
- Panel type
- 72 and 60 cells
- Panel position
- Horizontal
- Attachment
- Concrete tile/board
- Inclination
- Coplanar means that all the points or lines lie in the same plane.
No customer reviews for the moment.
You might also like
- On sale!
- On sale!
- On sale!