Structure kit for three photovoltaic solar panels. Sunfer 02.1V3 co-planar support for slate-inclined roof with continuous screw attachment to concrete and/or wood. Can hold 60 or 72 cell panels vertically.
Maximum size of the panel is 2279 x 1150 mm and width of 30 to 45 mm.
The kit is easy to install and allows for expansion based on needs. Anchor screws not included.
The structure kit for coplanar support Sunfer 02.1V03 is designed for fixing three photovoltaic solar panels on a slate roof, with anchoring to concrete and/or wood.
We remind you that for other types of roofs, at El Almacén Fotovoltaico, we have other specific Sunfer kits, such as for tile, sandwich panel, sheet metal roofs, or ground installations.
The installation supports panels with 60 and 72 cells, and with maximum dimensions of 2279 x 1150 mm, as well as a width between 30 and 45 mm.
Depending on the system on which the tile roof is mounted, whether it's wood or concrete, at El Almacén Fotovoltaico, we advise you to prepare the installation of the kit differently. While for roofs on a concrete layer, we recommend using mesh or basket, and chemical anchor. In the case of installing the kit on wooden beams, we recommend pre-drilling the wooden beam without impact, with a diameter smaller than the included screw. All of this is to make assembly easier for you.
This structure is designed for slate tile roofs. It withstands winds of up to 150 km/h. In the technical data sheet, there is a section on wind loads.
Sunfer holds the ISO:9001 certificate for the design, manufacturing, sale, and installation of solar energy structures, as well as having CE marking. The specific certificate for this kit can be downloaded from the following link:
Here you have the catalog of structures and accessories from Sunfer.
If you find any item that is not available on ElAlmacenFotovoltaico.com, please contact us so we can arrange it for you.
Before installation, it should be verified that the roof structure is sufficiently rigid to support the photovoltaic solar panels.
The structure materials are entirely made of high-quality aluminum, while the screws and accessories are made of stainless steel.
The alloy of the profiles is EN AW 6005A T6, which is a high-strength aluminum alloy.
It offers up to 15 years of warranty on raw materials and up to 25 years on anodizing.
Depending on availability, the shipment will be made in different packaging.
Data sheet
No customer reviews for the moment.
You might also like
