Structure kit for four photovoltaic solar panels. Coplanar support Sunfer 02.1V4 for continuous screwing for pitched slate roof with anchorage to concrete and/or wood. It can hold a 60 or 72-cell panel arranged vertically.
Maximum size of the panel 2279 x 1150 mm and width of 30 to 45 mm.
The kit is easy to install and allows for expansion as needed. Anchor screws not included.
The structure kit for coplanar support Sunfer 02.1V04 is designed to fix four photovoltaic solar panels on a slate roof, with anchoring to concrete and/or wood.
We remind you that for other types of roofs, at El Almacén Fotovoltaico, we have other specific Sunfer kits, such as for tiles, sandwich panels, metal roofs, or ground mounting.
The installation supports panels with 60 and 72 cells, and with maximum dimensions of 2279 x 1150 mm, as well as a width between 30 and 45 mm.
Depending on the system on which the tile roof is mounted, whether it is wood or concrete, at El Almacén Fotovoltaico, we advise you to prepare the kit installation differently. While for the roof on a concrete layer, we recommend using mesh or basket, and chemical anchor. In the case of installing the kit on wooden beams, we recommend pre-drilling the wooden beam without a hammer function, with a diameter smaller than the included screw. All to facilitate the assembly for you.
This Structure is designed for slate tile roofs. It can withstand winds of up to 150 km/h. In the technical sheet, there is a section on wind loads.
Sunfer holds the ISO:9001 certificate for the design, manufacture, sale, and installation of solar energy structures, as well as having CE marking. The specific certificate for this kit can be downloaded at the following link:
Here you have the catalog of structures and accessories from Sunfer.
If you find any item that is not available on ElAlmacenFotovoltaico.com, please contact us so we can manage it for you.
Before installation, it must be verified that the roof structure is sufficiently rigid to support the photovoltaic solar panels.
The structure materials are made entirely of high-quality aluminum, while the screws and accessories are made of stainless steel.
The alloy of the profiles is EN AW 6005A T6, which is a high-strength aluminum alloy.
It offers up to 15 years of warranty on its raw material and up to 25 years on the anodized surface.
Depending on availability, the shipment will be made in different packaging.
Data sheet
No customer reviews for the moment.
You might also like
