Structures Union Kit S15
€14.50
Sunfer S15 solar panel structure connection kit allows to connect the G1 profiles of kits so that the panels are continuous. It consists of...
HorarioH: 08:30-14:00 / 16:00-18:30
Kit 2 Coplanar screw-on support for Sunfer 01V2 tile roof cover.
Structure kit for photovoltaic solar panel. Sunfer 01V2 coplanar support for continuous screwing for sloped roof with anchoring to concrete and/or wood. It has the capacity for two panels of 60 or 72 cells arranged vertically.
Maximum size of the panel 2279 x 1150 mm and width of 30 to 45 mm.
The kit is easy to install, without the need to remove the tile, and allows for expansion options based on needs.
€78.54
€68.91 Save €9.63
Tax included
The structure kit for coplanar support Sunfer 01V02 is designed for fixing photovoltaic solar panels on any type of sloped roof, with anchoring to concrete and/or wood.
We remind you that for other types of roofs, at El Almacén Fotovoltaico, we have other specific Sunfer kits, such as for sandwich panels, sheet metal roofs, or ground installations.
The panels are to be installed vertically and can accommodate panels with 60 and 72 cells and with maximum dimensions of 2279 x 1150 mm, as well as a width between 30 and 45 mm.
The system is screwed onto concrete/wood using a double-threaded screw with a sealing washer, made of stainless steel (A2-70).
We recommend anchoring it on the ridge of the tile to prevent any leaks.
Depending on the system on which the tile roof is mounted, whether it is wood or concrete, at El Almacén Fotovoltaico, we advise you to prepare the installation of the kit differently. While for a roof on a concrete layer, we recommend using mesh or basket, and chemical anchor. In the case of installing the kit on wooden beams, we recommend pre-drilling the wooden beam without percussion, with a diameter smaller than that of the included screw. All this to facilitate the installation process for you.
The Sunfer sealing joints are made of EPDM.
This structure is designed for tile roofs. It can withstand winds of up to 150 km/h. The technical data sheet includes a section on wind loads.
Certification
Sunfer has ISO 9001 certification for the design, manufacture, sale, and installation of solar energy structures, as well as having CE marking. The specific certificate for this kit can be downloaded from the following link:
Here is the catalog of Sunfer structures and accessories.
If you find any item not available on ElAlmacenFotovoltaico.com, please contact us so we can assist you.
Before installation, make sure that the roof structure is sufficiently rigid to support the photovoltaic solar panels.
The structure materials are entirely made of high-quality aluminum, while the screws and accessories are made of stainless steel.
The alloy of the profiles is EN AW 6005A T6, which is a high-strength aluminum alloy.
It offers up to 15 years of warranty on its original material, and up to 25 years on anodizing.
Depending on availability, the shipment will be made in different packaging.
Warranty
Elements
- Check the Installation Manual.
Downloads
AF-SUNFER-01V02
5 Items
Data sheet
- Panel type
- 60 and 72 cells
- Panel position
- Vertical
- Attachment
- Concrete tile/board
- Inclination
- Coplanar means that all the points or lines lie in the same plane.
No customer reviews for the moment.
You might also like
- On sale!
- On sale!
- On sale!